Home plumbing problems can be frustrating and costly to repair. Knowing how to identify the most common issues and having simple solutions to fix them will save you time and money. In this guide, we’ll discuss the six most common at-home plumbing problems and how you can easily fix them.

1. Low Water Pressure: Inspect Plumbing Supply Lines 

If you’re experiencing low water pressure, the first thing to do is inspect all of your plumbing supply lines. Make sure they are properly attached and aren’t leaking anywhere. You may also need to check the shut off valves and replace them if they’ve become corroded or blocked. Finally, inspect any hose bibs near your outside faucets for leaks as well.

2. Clogged Drains: Unclog the Drain With a Plunger 

Plungers are the best way to quickly unclog a drain without any harsh chemicals. To use a plunger, place it firmly over the clogged drain and make sure there is enough water in the sink to create a seal. Work the lever up and down several times, then remove the plunger quickly and check to see if the clog is cleared. If not, repeat until it is done.

3. Leaky Faucets: Replace Faucet Washers and O-Rings 

Leaky faucets can be caused by a worn out washer or O-Rings. To fix this, shut off the water supply, unscrew the faucet handle and remove both the washer and O-ring. Clean any debris or sediment out of the valve body and reinstall new parts. Once everything is in place, test it out to make sure it’s properly secured.

 4. Overflowing Toilets: Shut Off Your Water Supply 

Overflowing toilets are a tough problem to solve, but it starts with shutting off the water supply. Locate the water valve knob that’s typically located near the base of the toilet. Turn it clockwise to stop the flow of water. If you have a shutoff valve next to your bathroom sink, switch that off as well. Finally, hold down the toilet handle for 10-15 seconds and flush multiple times until any clogs in the pipes have been eliminated.

 5. Running Toilet: Check that Flapper is Closing Properly 

If you‘ve checked for a clog and there doesn’t appear to be one, you may need to replace the toilet flapper valve. The best way to do this is by checking if the flapper is closing properly — sometimes they can get stuck or kinked and won’t fully close after flushing. To fix this, simply remove the existing flapper and install a new one

Fix your plumbing issues right now. It’s not necessary for you to put up with your plumbing issues or make an attempt to remedy them on your own. A plumber can assist you with any problems in your house at any time. Always make sure to call for assistance before attempting to fix more significant plumbing issues!

Are you worried about a significant plumbing issue near your house? 

We’re prepared to assist. Contact us if you have any queries or worries concerning our licenced plumbers, and keep reading our blog for further useful information.